DTF Head Care Solution 1000 ml (33.8 fl oz)

The Ultimate Long-Term Protection for Your Printer DTF Head Care Solution

In the professional world of digital textile decoration, your equipment is your most valuable asset. The printhead is undoubtedly the most sensitive and expensive part of this system. Maintaining this component requires a dedicated strategy and the right chemical support. The DTF Head Care Solution 1000 ml (33.8 fl oz) is designed for high-volume shops that prioritize machine longevity. This large-format bottle provides a long-lasting supply of premium maintenance fluid. It ensures that your production lines stay active and your print quality remains at its peak.

The Science of Advanced Printhead Preservation

Digital inks used in the Direct-to-Film process are highly pigmented. While this creates stunning visual results, it also poses a risk to the hardware. Pigments can settle and create a thick sludge if left stationary.

• Molecular Breakdown of Residue: This care solution works at a molecular level. It dissolves dried ink without the need for aggressive scrubbing. It effectively cleans the microscopic channels within the printhead.

• Balanced Chemical pH: Many generic cleaners are either too acidic or too alkaline. Our formula is pH-balanced specifically for piezo-electric technology. This prevents the internal delicate seals from drying out or cracking over time.

• Lubrication and Moisture: Beyond just cleaning, this solution provides essential moisture. It creates a protective barrier on the nozzle plate. This barrier prevents the air from drying out the ink during short periods of inactivity.

Why the 1000 ml Size is Essential for Professionals

Choosing the larger 33.8 fl oz volume is a strategic decision for growing businesses. Consistency is the key to effective maintenance.

Large-scale operations cannot afford to run out of supplies mid-week. Having a full liter of solution ensures that every machine in your shop receives the same level of care. It is particularly useful for those managing multiple printer setups. Using a single, high-quality product across all units eliminates variables in your maintenance logs. Furthermore, the 1000 ml bottle offers the best value per ounce. This helps lower your overall operating costs without sacrificing the safety of your hardware.

Best Practices for Daily and Long-Term Maintenance

Routine is the enemy of hardware failure. A few minutes of care each day can prevent hours of troubleshooting later.

1. End-of-Day Wet Capping: This is the most important step for any DTF operator. After the final print, clean the capping station area. Fill the cap with a small amount of the DTF Head Care Solution. This keeps the nozzles submerged in a protective environment overnight.

2. Cleaning the Wiper Blade: The wiper blade often collects thick, dried white ink. If left uncleaned, it will transfer this debris back onto the printhead. Use a lint-free swab dipped in the solution to wipe the blade clean every morning.

3. Extended Shutdown Procedures: If you plan to leave your printer idle for more than three days, a full flush is recommended. Replacing the ink in the lines with this care solution prevents permanent clogs. This is vital for holiday breaks or maintenance periods.

Achieving Perfection in Every Print Transfer

A well-maintained printer does more than just last longer; it performs better. Print quality is directly linked to the health of the nozzle plate.

When your nozzles are perfectly clear, your ink delivery is consistent. This results in smooth gradients and solid white underbases. If you are using a UV Gang Sheet Builder for intricate stickers, precision is everything. Even a single clogged nozzle can cause horizontal banding that ruins a project. By using a professional care solution, you eliminate these defects. Your DTF Transfer By Size orders will come out with the vibrant colors and sharp details your customers expect. Consistency builds trust, and trust builds your brand.

Compatibility Across Various Hardware Platforms

Versatility is a core feature of the DTF Head Care Solution 1000 ml. It is engineered to work with a wide range of digital printing technology.

The solution is fully compatible with Epson-based printheads, which are the industry standard for DTF. It also works effectively with industrial heads like Ricoh or Kyocera in certain configurations. Its gentle yet effective formula makes it safe for dampers, ink lines, and manifolds.

If your shop also utilizes a Semi-Automatic Heat Press, you understand that the final product is only as good as the print. A clean printhead ensures the ink film thickness is uniform. This allows the heat press to apply even pressure and temperature, resulting in a flawless bond to the fabric.

Safety, Storage, and Eco-Conscious Formulation

We believe that a clean shop should also be a safe shop. Our formula is designed with the user in mind.

The solution is low-odor and does not contain volatile solvents that irritate the respiratory system. While it is safer than industrial cleaners, we always recommend wearing gloves during maintenance.

Proper storage will maximize the shelf life of your 1000 ml bottle. Keep it in a cool environment away from heat sources. Ensure the cap is tightened after every use to prevent any airborne contaminants from entering the bottle. Using a dedicated syringe for dispensing will also keep the bulk supply pure and effective for months.

Conclusion: Protecting the Heart of Your Business

Success in the custom apparel industry is built on reliability. When a customer places an order, they expect a perfect result on time. The DTF Head Care Solution 1000 ml (33.8 fl oz) is the tool that makes this reliability possible. It is an investment in the "heart" of your production line.

By avoiding the high costs of printhead replacement, you increase your profit margins. You also reduce the stress associated with technical failures. This professional care fluid provides the security you need to scale your operations. Keep your colors bright, your lines sharp, and your printer healthy. Choose the solution that the pros trust to keep their business moving forward every single day.

"Maintaining a healthy printhead is the first step toward achieving professional results, but the final quality of your garment decoration also depends on the substrate you choose. To ensure your high-resolution prints look their best and last through countless washes, we recommend pairing your transfers with premium apparel. Explore our curated collection of Blank T-Shirts, specifically selected for their smooth surfaces and excellent heat-press compatibility, to provide the perfect canvas for your DTF projects."

Model: Pressly HYDRO1620 Hydraulic Head Moving Heat Press

Platen Size and Quantity: 15.7x19.7 inches (40x50 cm), 2 platens in total

Attachments: 2 laser attachments with small adhesive cable organizers

Product Weight: 463 lbs (210 kg)

Product Dimensions: Length: 36 inches, Width: 31 inches, Height: 54 inches

Package Weight: 551 lbs (250 kg)

Package Dimensions: Length: 39 inches, Width: 37 inches, Height: 57 inches

Power Requirements: 110V, 2KW, 20A

Electrical outlets: 2 convenient electrical outlets located on the back for powering laser attachments

Temperature Range: 80 - 500°F

Timer Range: 1 - 999 seconds

Pressure Range: 0-16 MPa, 0-1102 lbs

Heat Distribution: Thick heat plate design for stable, even heating across the surface

Recommended Hydraulic Oil: AW-46 ydraulic oil (not included)

Oil Tank Capacity: 5.3 gallons (20 liters)

• Pressly HYDRO1620 - Hydraulic Head Moving Heat Press
• Magnetic Laser Guide Attachments (2 pcs)
• 1-year limited warranty
• USA based support via phone or email

This product is shipped in a crate weighing approximately 530 lbs. We recommend having a pallet jack available at the delivery address to safely move the heat press to its intended location for unpacking and setup.

Important Delivery Instructions for the Hydro1620 Hydraulic Heat Press
The Hydro1620 Hydraulic Heat Press must arrive securely packaged in a sealed wooden crate, unless otherwise stated or pre-arranged.

If the crate or product is visibly damaged upon delivery:
DO NOT accept the delivery immediately.

Instead, follow these steps carefully:

1. Ask the delivery driver to document the damage by writing a Damage Report.
   
2. Take clear photos of the damaged crate/product and the Damage Report.
   
3. Do not sign the Proof of Delivery (POD) without marking the crate or product as "DAMAGED".
   
4. Notify us immediately via phone or email.
   
   

⚠️ IMPORTANT: If damage is not clearly indicated on the Proof of Delivery (POD) at the time of receipt, we will not be able to file a claim with the carrier. This will result in no compensation or replacement. Your compliance with this process is essential.


Setup: Place the Pressly HYDRO1620 on a stable surface, ensuring proper power connection based on the power specifications. Before first use, fill the hydraulic system with the recommended hydraulic oil and quantity. Add at least 3 gallons of AW-46 hydraulic oil.

Temperature & Pressure Settings: Set the temperature and hydraulic pressure settings according to the material being used.

Design Alignment: Attach the magnet laser light guides to the top of the heat press to assist in precise alignment of designs.

Pressing: Place the garment or media on the platen, apply the correct pressure, and apply heat according to the required time and temperature settings.

Maintenance: Regularly check and clean the platen and hydraulic system to ensure smooth operation and prolong the life of the heat press. Check the hydraulic oil level regularly using the sight gauge located at the bottom right of your heat press. If the level is below the 50% of the glass, top it up. Be sure to change all the oil once a year, and always use the recommended AW-46 hydraulic oil for optimal performance.

The Pressly Hydro1620 Hydraulic Heat Press comes with a 1-year warranty, effective from the date of purchase. The warranty covers non-consumable components only, provided the equipment is used under normal conditions and maintained properly.

Covered Under Warranty:

• Control board and internal electronics
• Hydraulic pump, motor, and other components of the hydraulic system
• Structural mechanical parts (excluding cosmetic damage or abuse)
• Platen mounts and base metals

Excluded From Warranty (Consumable Components)
The following items are considered consumables and are not covered under this warranty:

• Pressure pads, high-temperature texturizing sheets, laser attachments, platen covers, silicone rubber mats
• Fuses, power cords, buttons, and exterior casings
• Parts subject to normal wear-and-tear or improper storage
• Any components damaged due to misuse or environmental conditions (e.g., dust, heat, moisture)

Support During the Warranty Period

• Eagle Print will provide remote technical support via email, phone, or video.
• When possible, video tutorials or repair instructions will be provided.
• Replacement parts for issues covered under warranty will be shipped depending on availability and after evaluation. The customer will not be charged for eligible replacement parts covered under the warranty; however, the customer is responsible for the shipping costs.
• This warranty does not include on-site service or labor.

Important Delivery Instructions for the Hydro1620 Hydraulic Heat Press
The Hydro1620 Hydraulic Heat Press must arrive securely packaged in a sealed wooden crate, unless otherwise stated or pre-arranged.

If the crate or product is visibly damaged upon delivery:
DO NOT accept the delivery immediately.

Instead, follow these steps carefully:

1. Ask the delivery driver to document the damage by writing a Damage Report.
   
2. Take clear photos of the damaged crate/product and the Damage Report.
   
3. Do not sign the Proof of Delivery (POD) without marking the crate or product as "DAMAGED".
   
4. Notify us immediately via phone or email.
   
   

⚠️ IMPORTANT: If damage is not clearly indicated on the Proof of Delivery (POD) at the time of receipt, we will not be able to file a claim with the carrier. This will result in no compensation or replacement. Your compliance with this process is essential.


Shipping Damage & Insurance Claims
Eagle Print is not responsible for damage sustained during shipment. However, all products are shipped with insurance. If the Customer receives a damaged unit:

• The Customer must report the issue immediately (preferably within 24 hours).
• Eagle Print will assist in submitting an insurance claim with the shipping provider.
• Claims and resolutions may take up to 50–60 business days depending on carrier response.
• Clear photos, videos, and a damage description may be required for claim submission.

Warranty Limitations and Exclusions
This warranty does not apply to issues resulting from:

• Improper setup or use outside of intended purpose
• Unauthorized modifications or attempted repairs
• Use in unsuitable environments (e.g., excessive heat, humidity, or dust)
• Use of incorrect fluids, voltage, or replacement parts
• Accidents, neglect, or failure to follow maintenance guidelines

Final Sale Terms
This product is sold as a final sale item. No returns or refunds are accepted except for qualifying issues covered under this warranty. By purchasing and using this product, the customer acknowledges and agrees to the warranty terms stated in this section.

Warranty Assistance
For all warranty-related inquiries, support, or part requests, the customer should contact Eagle Print directly with:

• Order Number
• Order Email
• Description of the issue (photos/videos if possible)

Используйте сворачиваемые вкладки для получения более подробной информации, которая поможет клиентам принять решение о покупке.

Пример: правила доставки и возврата, руководства по размерам и другие распространенные вопросы.