Three ways to order a DTF gang sheet
Whether you already have print-ready artwork, want help laying it out, or just need one design at a set size, there's a matching option below.
Upload Gang Sheet
Already have your gang sheet ready? Simply upload your pre-made file and we'll print it as-is. Full creative control, no limits.
- Photoshop / Illustrator users
- Ready-made layouts
- Bulk & repeat orders
Create / Build Gang Sheet
Use our online builder to drag, drop, and arrange your designs directly on the sheet. No Photoshop or Illustrator required.
- Beginners & first-time orders
- No design software available
- Custom layout in minutes
Gang Sheet by Size
Choose your transfer size and upload a single design. Pricing is based on dimensions — perfect for testing or small runs.
- Single designs or logos
- Test orders
- Predictable per-unit cost
How to apply a DTF Transfer
Matching the right temperature and time to your fabric type is the most important step. Use the panel to pick a fabric and see the press settings, then follow the steps in order.
Preheat the press
Set your heat press based on the fabric type selected in the panel and let it fully preheat.
Position the transfer
Place the printed film face-up on the fabric. Make sure the fabric is smooth and wrinkle-free for the best adhesion.
Apply heat & pressure
Press with medium to firm pressure for the time listed for your fabric type in the panel.
Instant peel
Peel the film immediately while it's still hot, right off the press. No cooling time needed.
Final finish (optional)
For a softer, more embedded feel, press again for 3–5 seconds with a Teflon or parchment sheet. This gives the print a texture closer to DTG.
How to apply UV DTF Stickers
No heat required. Five quick steps get you a smooth, bubble-free finish on any flat, hard surface.
Clean the surface
Make sure it's smooth, dry, and free of dust or oil.
Peel the clear backing film
Slowly peel off the transparent backing, leaving the sticker on the transfer film.
Position the sticker
Place the adhesive side onto the surface, checking placement carefully — it's hard to adjust once it's down.
Press firmly
Press firmly with a squeegee or your finger to remove any air bubbles.
Peel the transfer film
Slowly peel off the top transfer film, leaving the sticker applied to the surface.
